Tire Maintenance Key Points for Drive and Driven Wheels of an I-3C Implement
I. Routine Tire ChecksTire Pressure Check:
Regularly check and maintain appropriate tire pressure, which is the most fundamental and crucial aspect of tire maintenance. Over-inflation or under-inflation can accelerate tire wear and may affect vehicle handling and safety.It is recommended to check tire pressure every 20,000 to 30,000 kilometers and adjust it according to the vehicle manufacturer's recommended values.Tire Appearance Inspection:Periodically inspect the tire's appearance, including the tread, sidewall, and bead areas.Pay special attention to cracks, injuries, bulges, or abnormal wear on the tires. Once these issues are found, replace the tires immediately to avoid potential safety hazards.Tire Wear Limit Check:There is usually a striped trace on the tire tread, indicating the wear limit. When the tire wears down to this limit, it must be replaced.Regularly check tire wear and determine if tire replacement is necessary based on this assessment.
II. Tire Maintenance and ServicingWheel Alignment:
Regularly perform wheel alignment to ensure proper installation and positioning of the wheels and suspension system. This helps reduce abnormal tire wear and improves vehicle handling and stability.It is recommended to check wheel alignment after a certain mileage (such as 20,000 to 30,000 kilometers) or if the vehicle exhibits abnormal phenomena such as drifting or steering wheel vibration.Tire Rotation:To ensure more uniform tire wear, tire rotation should be performed regularly. This helps extend tire life and reduce safety hazards caused by uneven tire wear.Generally, tire rotation is recommended every 10,000 kilometers or so.Avoiding Tire Damage:During driving, avoid tire damage from impacts and scratches. Especially on uneven roads, choose smoother paths, reduce speed, and minimize tire collisions and wear with the road surface.When parking, place the vehicle on a flat, dry, and oil-free surface to prevent tire corrosion or deformation.Tire Cleaning and Servicing:Regularly clean and maintain tires to remove dirt and oil stains on the tire surface. This helps keep tires clean and beautiful and extends tire life.When cleaning tires, use professional tire cleaner and a soft brush. Avoid using strong acids, strong alkalis, or other corrosive cleaners.
III. PrecautionsAvoiding Overcharging and Over-discharging:
For electric or hybrid vehicles, battery health also affects tire maintenance. Therefore, avoid overcharging and over-discharging to extend battery life and reduce abnormal tire wear.Regular Maintenance and Checks:Besides tire maintenance, regularly perform overall maintenance and checks on the vehicle. This includes inspecting the health of the suspension system, braking system, steering system, etc., and promptly replacing severely worn components.Following Manufacturer Recommendations:When performing tire maintenance, follow the vehicle manufacturer's recommendations and the guidance in the maintenance manual. This ensures the correctness and effectiveness of the maintenance work and reduces safety hazards due to improper operation.By following these tire maintenance key points, you can extend tire life, improve vehicle handling and safety, and ensure a smoother driving experience for the I-3C Implement.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy